eFactoryPro 3.0
16 results found
-
full circle
Lets connect parts arrival notifications to e-mail the originator and the scheduler so we can plan repairs.
2 votes -
Would be helpful to narrow down searches with AND logic. So you could use "relay" AND "24" to narrow search for 24 volt relays
Search using AND logic
2 votes -
Text notifications when all parts are allocated to WOs that require kitting
When the SCS receives all parts to a WO, the tech that requested the parts would get an automated text notification that their parts have arrived.
3 votes -
Inventory adjustment
There needs be be a parts adjustment on a bearing 205pp I used two but inventory showed only one
1 vote -
Photos for parts
I think it would be a huge asset if we could add photos of parts to the database that appear where the "robot arm" is located in the parts screen. Would be good to be allowed multiple photos with arrows to cycle through them. I realize this could open an avenue for error but if a process for validation is created the benefits would be great I think.
14 votes -
Staged parts removed from available count.
Staged parts should be removed from inventory availability count. This will trigger the system to initiate a restock based on demand. Also, this will allow for inventory to be staged in reusable job plans that regenerate.
2 votes -
Parts requsition vs consumption quantity
Parts (especially liquids) which are allocated/used in quantities different than their containers hold are troublesome. It would be efficient to be able to receive quantities separate from how allocated and used. so 5 gallon pails(or any volume) could be requisitioned and the allocation and use could be done in a different qty/volume count.
5 votes -
Require Standard Part Nomenclature to Part Description
Parts need a standard description to search parts effectively (ex: All 1-7/16" 4-bolt Flange Block Bearings should be listed as: "1-7/16IN ID; 4B; FB" or all 480V 15HP 3500RPM 215 C-face motors should be listed as "15HP; 3500RPM; 215TC; 480V"). This will greatly increase the buyer and supply chain specialist's abilities to source parts from other local sites, vendors, or manufacturers.
If possible, this could be done as "required fields" when entering new parts into the system that auto-generate a part description from the fields.19 votes -
Work module part search is not looking for manufacturer part number which is what we typically use.
When we search for a part using the manufacturer number it comes back with no results. Also if we use a dash it will come back with all the site parts.
5 votes -
Part Notes/Description section
It would be great if parts has a better notes/description text section so that additional info buyers need to get the actual specifics correct could be entered or misc info that is helpful to everyone
4 votes -
Dedicated Crib PC/Login
Is it possible to create a log in that can be used on a dedicated PC located in the Crib/Store that can display the Crib Portal? This will only be used to identify the location of stock.
1 vote -
Quantity Adjustment
Supply chain specialists and technicians need to be able to adjust the quantity of parts ordered both up and down. Not allowing people to adjust upwards is not efficient and makes no sense at the site level.
6 votes -
Posting PO generates parts label to be printed
Instead of generating a receipt document to print or save, have that receipt generate as a document attached to that PO receipt transaction and have the system generate a parts label so that you don't have to copy and paste everything from the client into the parts label reports every time you receive an inventory item in.
4 votes -
Part number search should disregard dashes, slashes, etc.
When searching for a part, if the number has a dash it will not show any results if you do not type the dash.
5 votes -
Bin location having parent bin location
Having the ability to add parent loc (ex. aisles) so that when you are running a cycle count you can run it for the parent location (ex. aisle) rather than having to input each specific bin location. This would help sites with larger crib inventory to reduce time wasted bouncing around the crib.
We have 484 bin loc on our K aisle (7944 total bins currently). If we could generate our cycle count by the K aisle this would allow us to break our cycle counts down more and run it for the whole month rather than having to run…
1 vote -
Need to add "NDA EARLY AM" to delivery type menu when processing requisitions.
Need to add "NDA EARLY AM" to delivery type dropdown menu when processing requisitions. This would help with enhancing communication because there are scenarios when "EARLY AM" is needed versus just "NEXT DAY". It's known that the buyer typically selects delivery type when processing req. into POs, but to help enhance communication, the SCS should be able to select delivery type as part of req. processing. If the urgency changes during the transition, then buyer can update as needed.
4 votes
- Don't see your idea?
