eFactoryPro 3.0
311 results found
-
Enable Add Assembly
Give sites the ability to "Add Assemblies" for parts in inventory. It would be very helpful to add an assembly list of parts that are used to create another part (e.g. a pump could have bearings, gaskets, and an impeller as assembly parts)
2 votes -
Work order tech remarks on PRINTED work order
When printing work orders, notes are listed without date/time/tech name information. This makes it difficult to see a timeline of events and who did what tasks. Each line of NOTES entry should start with [DATE comment entered] [TIME comment entered] [TECH that entered comment]. Beginning of each comment like would look like this "08/02/2018 06:00 JRAMSEY ....". eFP2 did this and was very useful.
2 votes -
We need to be able to track response time and MTTR for Safety work orders for our KPI as defined by our customer.
Need to be able to track response time and MTTR for safety work orders for our KPI.
2 votes -
Add Data Field "Remarks" to Accumulated Labor Report
In order to determine PM effectiveness, adding the data field "Remarks" to the Accumulated Labor report will give us the ability to sort PM's where something was found or adjusted, from PM's that were "Completed". The Shift Turnover report does not allow you to pull all work orders that had labor in a specific month.
2 votes -
MACHINE DETAILS ON WORKORDER IN THE CLIENT.
When looking up a work order in the Client it no longer (very rarely) shows you the work order details for machine. The is crucial to us (sc & s/p) to have this.
**I have placed in tickets and no matter what it has always come back as "resolved" even if it the problem has not been corrected.
2 votes -
New rule in escalation system (Event Monitor)
We need a escalation rule with Malfunction Type, actually we only have Operating Status as an option, provoking that work orders with Malfunction Type UP as PMs, TR, EV, CM, etc sending notification
2 votes -
Cancelled Work Orders should say why they were cancelled
Cancelled work orders should have reason stating why the work order was cancelled.
2 votes -
Consume multiple part simultaneously
Consume multiple parts at the same time.
2 votes -
Client: Purchase Order Details
knowing who put the part need request into the system lets us know who to go to for clarification. we need to be able to go to one person and ask what they mean/ or what they want.
the general request does not always cover what needs to be done. this is very important and can take a LOT OF TIME getting the proper information.
2 votes -
Tech Portal - Download/Print control center's status monitors
Require ability to download and/or print status monitors in Control Center.
2 votes -
Tech Portal: Add option to sort status monitors in Control Center
Add option to sort/filter the active/inactive existing status monitors in the Control Center.
2 votes -
Tech Portal: Order Details of Part Information
As a tech, when ordering parts it would be nice to see details of what we ordered.
I cannot find a way to pull up my comments/notes on a part order i made 2 months ago.
Now that i received the part, i need to reference that information.Supply Chain order data
Material/Parts order information
Historical
Receiving2 votes -
PM Plans "Building" field editable
When reviewing PM Plans, there are fields that I wish I could edit, that I can't. Such as the "Building" field. When I click the "EDIT" button to the right of the row, it takes me to a new page where I can not update that information.
1 vote -
BOM Updating Manually
Currently in the system is it configured where a technician consumes a part, it is added automatically into the BOM of the equipment asset. I believe this function should be taken off. This often muddies up the BOMs where any small thing that can be consumed on an asset is added, where eventually a BOM can have 100, 200 etc line items. Moreover, when an item is updated and/or retrofitted, it will add that item but also have kept the previous item as well. If another person or technician goes into a BOM and looks for a part (Example motor)…
1 voteThe current configuration was originally designed to ensure asset records don't remain empty, given that manual maintenance across every asset isn't scalable with our current resources, while also preserving cross-site visibility of parts history. Because this touches core operational workflows and historical site practices, any decision to alter this setup or to establish a formal auditing process requires review and alignment with leadership. We will continue to evaluate.
-
Task notes formatting
It would be helpful if we can add formatting to task notes like bullet points, separate paragraphs, indentations, etc. The job plans were updated to allow this formatting and it would be nice to have the same in task notes.
1 voteCarl will reach out to the users and get back to us with more information regarding the need.
-
Make cycle count consistant.
When running stock count at the end of the month, it should not remove parts from the cycle count and then ding SCS metrics for it. For example, several times I have ran my cycle count last day of the month and not get 100% even though I entered 100% of what was on the list. This is due to the system creating its expected count on the 1st of the month (example 93 parts) but then NOT giving me the full count at the end of the month (ex 89 parts). Then it causes the SCS to have bad…
1 voteWe're currently working on a new supply chain portal that includes the cycle counts functionality. We'll keep this feedback in mind as we continue designing that experience. While we can't make any commitments about specific changes at this time, improving usability and layout are considerations we're taking into account as the new portal is developed.
-
Work Order Entry Screen Malfunction Update
Today, when the customer enters a work order on the customer screen, they can very easily miss or bypass specifying a malfunction because the field defaults to None. In order to have more data accuracy, and require less rework after the work orders are entered, the malfunction status should be an empty required field that forces you to make a selection.
1 vote -
conteo de horas
Mejorar que al finalizar el mes y comenzar el otro mes ,que no se borre el registro de mano de obra de ordenes ya cerradas ,para poder ver cuantas horas se lleva en la semana
1 vote -
Food Safety clicker / Adding Attachments
Could we add the possibility of having a 'Food Safety' option, just like there is a 'Safety Option' when entering a WO.
Also, could the customer portal have the option of adding a picture.
1 vote -
Cambio de unidad de horas a minutos en reporte
Buenas tardes,
Nos pudieran ayudar para que el reporte de shift turnover reporte venga el tiempo muerto, tiempo de reparación y tiempo labor en unidad de minutos con 2 decimales, por favor. Muchas gracias.1 vote
- Don't see your idea?
